Solid drilling tools
Type 110 - Single flute gundrills Single flute gundrill Diameter range: 7.06 - 51.20 mm with 2 coolant holes Diameter range: 1.85 - 7.05 mm with kidney shaped coolant holes
Type 111 - Single flute gundrills Single flute gundrill 1 coolant hole Diameter range: 5.80 - 40.00 mm 2 coolant holes Diameter range: 40.01 - 60.00 mm
Type 112 - Single flute gundrills Single flute stepped gundrill Diameter range: 2.00 - 51.20 mm
Type 113 - Single flute gundrills Solid carbide gundrill Diameter range: 0.50 - 12.00 mm
Type 113-01 - Single flute gundrills Solid carbide stepped drill Diameter range: 1.50 - 10.00 mm
Type 01 - Single flute gundrills Deep hole drilling tool Diameter range: 13.50 - 43.99 mm
Type 02 - Single flute gundrills Deep hole drilling tool Diameter range: 37.00- 100.00 mm
Counterboring tools
Type 115 - Single flute gundrills Single flute counterboring tool Diameter range: 2.00 - 51.20 mm
Type 115-01 - Single flute gundrills Single flute stepped counterboring tool Diameter range: 2.00 - 51.20 mm
Type 115-03 - Single flute gundrills Single flute counterboring tool with guiding pilot Diameter range: 4.00 - 12.00 mm
Type 115-04 - Single flute gundrills Single flute counterboring tool with guiding pilot Diameter range: 12.00 - 60.00 mm
Trepanning tools
Type 114 - Single flute gundrills Trepanning gundrill Diameter range: 11.00 - 50.00 mm
Pilot drills
Type 153-02/ Type 153-03 - Single flute gundrills Solid carbide guide hole drill Type 153-02 Diameter range: 1.00 - 26.00 mm Type 153-03 Diameter range: 3.00 - 26.00 mm
Accessories
170-05 - Single flute gundrills Whipguide bushings with round or formed hole
170-01 - Single flute gundrills Whipguide housing
170-07 - Single flute gundrills Sealing disc made of Vulkollan
170-03 - Single flute gundrills Drill bush holder
170-04 - Single flute gundrills Drill bushings according to DIN 179 extended, heat treated steel
170-02 - Single flute gundrills Clamping cone
Grinding Machines
botek Double grinding wheel - Single flute gundrills
botek Sharpening fixture Type PS - Single flute gundrills Single flute gundrills and suitable for most tool grinders. Drill range: 0.50 - 6.00 mm
botek Sharpening fixture Type ZS - Single flute gundrills Single flute gundrills can be reground on any good tool grinding machine. Drill range: 2.00 - 50.00 mm
Single-spindle grinding machine MS 01 - Single flute gundrills suitable for our sharpening fixtures
Multi-spindle grinding machine MS 12 - Single flute gundrills For highly efficient grinding of large batches of tools with the same point geometry. The machine is suitable for tool diameters from 1.85 to 12.00 mm and tool lengths up to approx. 1000 mm. * also available with 3 spindles